Kuro IP Survey planned, RC Drill Contract and assays results
Released
Released
Announcement PDF
30 March 2026
This announcement is a re-release of the announcement originally released on 23rd March
2026 and has been updated to include assay results (refer Table 1 on page 2)
Major IP Survey Planned After Petrophysics Confirms
Geophysical Response at Kuro – RC Drill Contract Awarded
Petrophysical testing of rock chips supports the use of Induced Polarisation surveys to identify
extensions of high-grade manganese mineralisation beneath cover, ahead of planned RC drilling
Highlights
• Petrophysical testing of seven manganese rock chip samples from the Kuro Prospect completed.
• Anomalously high chargeability values of 484 to 642 mV/V – well above the values for typical
host rocks – confirm a very strong Induced Polarisation (IP) response.
• Initial Gradient Array IP (GAIP) survey planned to commence in April to screen the entire
discovery area for extensions of the mineralised system ahead of drilling.
• Follow-up Dipole-Dipole IP (DDIP) lines to be completed over priority anomalies to provide
additional depth information and better constrained targets for drill testing.
• Reverse Circulation (RC) drill contract awarded to Precision Exploration Drilling (PXD).
• Drilling targeted to commence late April-early May, subject to heritage clearance and weather.
Trek Metals Limited (ASX: TKM) (“Trek” or the “Company”) is pleased to report further recent progress
with exploration activities at the Christmas Creek Project, including petrophysical results at the Kuro
manganese discovery which have prompted the Company to initiate a major Induced Polarisation (IP)
survey over the entire discovery area.
The upcoming planned geophysical survey will commence ahead of the Company’s maiden drill
program, with the Reverse Circulation (RC) drilling contract now awarded to Precision Exploration
Drilling (PXD).
Background – Kuro Manganese Discovery
The Kuro Prospect is located within Trek’s Christmas Creek Project in the Kimberley region of Western
Australia, approximately 140km south-west of Halls Creek. Since its discovery in November 2025,
systematic rock chip sampling has returned exceptionally high-grade manganese (Mn) assays of up to
60.1% Mn, with an average result of 50% Mn (https://trekmetals.com.au/announcements/7326226).
The mineralised outcrop has been mapped over 750 metres of strike before disappearing beneath
recent sand cover.
2
The system is interpreted to represent a hydrothermal manganese system analogous in style to the
world-class Woodie Woodie manganese deposits of Western Australia. The key question now is to
establish the extent of the mineralised system beneath cover, a question the Company intends to
answer rapidly through geophysics and drilling.
The manganese mineralisation observed at surface has a very high density, with an average of
4.03g/cm3
, which in significant volumes could present as a gravity high feature. Based on the high
density of the manganese mineralisation, Trek undertook a detailed ground gravity survey which
identified two strong gravity high anomalies (https://trekmetals.com.au/announcements/7311646).
Petrophysics – Electrical Properties of the Kuro Manganese Samples
Petrophysical testing was commissioned by Trek and completed by Terra Petrophysics on seven rock
chip samples collected from the Kuro discovery area during the field program completed in late 2025.
All seven samples were classified as manganese mineralisation and underwent measurement of key
electrical, magnetic and physical properties relevant to geophysical exploration.
The data demonstrates a strong and remarkably consistent electrical signature across all the samples:
• Chargeability: anomalously high values of 484-642 mV/V across all seven samples
• Galvanic resistivity: very low values of 2-4 ohm-metres (Ωm) across all seven samples
• Inductive Conductivity: highly variably values, with three samples having no measurable
conductivity and the other four returning elevated values of 19-36 S/m
• Dry Bulk Density: high to very high values of 3.31-4.47 g/cm3
, consistent with high-grade
manganese mineralisation
Table 1: Key physical and electrical properties, along with the addition of recent assay results, of rock chip samples taken for
petrophysical analysis from the Kuro Prospect
Implications for Geophysical Surveying
The strong and consistent chargeability response across all seven Kuro samples, combined with low
resistivity, confirms that the manganese mineralisation should be highly responsive to Induced
Polarisation (IP) geophysical surveys. IP surveying detects the electrical chargeability contrast and is a
well-established technique for mapping sulphide- and oxide-bearing mineralisation sub-surface.
Critically, the electrical and physical properties of the sampled manganese mineralisation at Kuro
provide a clear geophysical contrast relative to the typical sedimentary host rocks of the Christmas
Creek area. This underpins the Company’s confidence that IP and additional gravity surveying will be
effective tools for detecting subsurface extensions to the mineralised system.
Physical
Property
Dry Bulk
Density
Average
Galvanic
Resistivity
Average
Chargeability
Average
Inductive
Conductivity
(g/cm^3) (Ωm) (mV/V) (S/m)
25TR1371 266592 7874334 4.47 3 484.4 36.1 57.72 1.21 1.04 1.56 0.03
25TR1372 266885 7874528 4.18 4 556.4 19 57.24 0.85 1.22 1.38 0.01
25TR1373 266907 7874540 4.04 2 641.7 32.2 56.35 1.00 1.35 1.91 0.03
25TR1374 266871 7874533 3.31 2 484.1 0 51.99 0.83 1.36 5.16 0.04
25TR1375 266646 7874265 4.38 4 550.5 0 52.74 0.64 1.13 5.17 0.03
25TR1376 266718 7874205 3.45 3 492.4 0 51.54 0.75 1.14 5.77 0.04
25TR1377 266872 7874108 4.38 3 617.4 34.9 57.63 1.40 1.01 1.06 0.03
Sample ID
MGA
East
MGA
North
Assays
Mn % Fe % AL % Si % P %
Sample Information Electrical Properties
3
Final results from the helicopter-borne electromagnetic (EM) and magnetic surveying have been
received, with data incorporated into the working models. No significant EM response was observed
over the Kuro Prospect, however given the highly variable Inductive Conductivity values (including
three samples with no response) in the petrophysical test work, these results are not unexpected.
Planned Induced Polarisation Survey Programme
Following these positive results, Trek has designed a two-stage IP survey program:
• Stage 1 – Gradient Array Induced Polarisation (GAIP): A survey grid will be completed over the
Kuro discovery area and along strike to screen for potential extensions of the mineralised
system beneath sand and alluvial cover. The GAIP method is an effective technique for rapidly
prioritising areas of IP anomalism across a broad survey area.
• Stage 2 – Dipole-Dipole IP (DDIP): Detailed DDIP lines will be completed over priority GAIP
anomalies to provide additional depth information and better constrained targets for drill
testing.
Figure 1. Petrophysical sample locations, highlighting high chargeability results across the Kuro Prospect area, showing
planned GAIP survey area and example DDIP lines. Background coloured imagery is ground gravity data (with hot colours
indicating dense material – interpreted to represent manganese mineralisation), black polygons are interpreted manganese
outcrop, and dots with Mn% callouts are rock chip sample locations.
4
Drilling – RC contract awarded
Trek has awarded the Reverse Circulation (RC) drilling contract at Christmas Creek to Precision
Exploration Drilling (PXD), an experienced contractor with a strong track record in the region, including
undertaking Trek’s 2025 drilling program at the Project.
The initial program will target the interpreted down-dip and along-strike extensions of the high-grade
surface mineralisation, including the significant gravity anomalism recently defined in high-resolution
ground gravity surveying.
Drilling is expected to commence in late-April to early-May 2026, subject to the successful completion
of a cultural heritage clearance survey. The region has also experienced significant rainfall and may
see more with ongoing tropical lows moving across northern Australia, which may impact the
commencement date.
Trek Metals CEO, Derek Marshall, said:
“The petrophysical results are extremely encouraging and demonstrate that the high-grade
manganese mineralisation discovered at Kuro has a very strong electrical signature. The combination
of very low resistivity and exceptional chargeability values confirms that the mineralisation is highly
amenable to Induced Polarisation surveying, which provides us with a powerful tool to detect
extensions to the mineral system beneath cover and rapidly generate high-quality drill targets.
“With the IP survey program now planned and the RC drill contract awarded, we are in an excellent
position to rapidly advance Kuro towards its first drill test. Following our recent capital raise, which
was strongly supported and welcomed a number of new institutional investors to the register, Trek is
fully funded to execute this next phase of exploration. We are looking forward to providing investors
with further updates as we move through this exciting phase of exploration.”
Readers are referred to Trek’s recent announcements, including:
• Investor Presentation (Mar 2026): https://trekmetals.com.au/announcements/7427303
• ASX Announcements (refer table 2 & links within at back of this announcement)
• Hole Truth Podcast (Feb 2026): https://trekmetals.com.au/activity-updates/PR0L3e-the-hole-
truth-mining-investment-podcast-episode-113-trek-metals-asx-tkm
Authorised by the Board of Directors
ENDS
For further information contact:
INVESTORS: MEDIA:
Derek Marshall Nicholas Read
dmarshall@trekmetals.com.au info@trekmetals.com.au 0419 929 046
JOIN TKM’S INTERACTIVE INVESTOR HUB
https://trekmetals.com.au/auth/signup
Interact with Trek Metal’s announcements and updates by asking
questions and comments which our team can respond to where possible
https://trekmetals.com.au/link/rLQqGP
5
COMPETENT PERSONS STATEMENT
The information in this report relating to Exploration Results is based on information compiled by the
Company’s Chief Executive Officer, Mr Derek Marshall, a Competent Person, and Member of the
Australian Institute of Geoscientists (AIG). Mr Marshall has sufficient experience relevant to the style
of mineralisation and to the type of activity described to qualify as a competent person as defined in
the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves.” Mr Marshall has disclosed that he holds fully paid Ordinary Shares and
Performance Rights in the Company. Mr Marshall consents to the inclusion in this announcement of
the matters based on his information in the form and content in which it appears.
Specific Exploration results referred to in this announcement were originally reported in the following
Company announcements.
Title Date
Outstanding New High-Grade Manganese Rock Chip Results at the Kuro
Prospect - Christmas Creek Project, WA
https://trekmetals.com.au/announcements/7326226
19th
January 2026
High-Grade Manganese Discovery at Christmas Creek Strengthened by
Extensive, Strong Gravity Anomalies
https://trekmetals.com.au/announcements/7311646
15th
December 2025
Trek to accelerate exploration at new High-Grade Manganese Discovery
at Christmas Creek Project, WA
https://trekmetals.com.au/announcements/7263873
17th
November 2025
Exceptionally High-Grade Manganese Discovery at Christmas Creek
Project, WA
https://trekmetals.com.au/announcements/7259499
13th
November 2025
The Company confirms that it is not aware of any new information or data that materially affects the
information included in the original announcements and that all material assumptions and technical
parameters underpinning the exploration results continue to apply and have not materially changed
DISCLAIMERS AND FORWARD-LOOKING STATEMENTS
This announcement contains forward looking statements. Forward looking statements are often, but
not always, identified by words such as "seek", “target”, "anticipate", “forecast”, "believe", "plan",
"estimate", "expect" and "intend" and statements that an event or result "may", "will", "should",
"could" or "might" occur or be achieved and other similar expressions.
The forward-looking statements in this announcement are based on current expectations, estimates,
forecasts and projections about Trek and the industry in which it operates. They do, however, relate
to future matters and are subject to various inherent risks and uncertainties. Actual events or results
may differ materially from the events or results expressed or implied by any forward-looking
statements. The past performance of Trek is no guarantee of future performance.
None of Trek’s directors, officers, employees, agents or contractors makes any representation or
warranty (either express or implied) as to the accuracy or likelihood of fulfilment of any forward-
looking statement, or any events or results expressed or implied in any forward-looking statement,
except to the extent required by law. You are cautioned not to place undue reliance on any forward-
looking statement. The forward-looking statements in this announcement reflect views held only as
at the date of this announcement.
6
JORC Table Section 1: Sampling Techniques and Data:
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of mineralisation
that are Material to the Public Report. In cases
where ‘industry standard’ work has been done
this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required,
such as where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
• Rock chip surface samples of approximately 1kg each were taken by
qualified and experienced exploration geologists based on visual
identification in field. Samples are selective but representative of the outcrop
from which they were taken. Rock chip sampling is an industry wide field
technique for establishing metal content to understand potential tenor of
underlying mineralisation.
• Samples were analysed at Terra Petrophysics for Induced Polarisation
(Chargeability), Galvanic Resistivity (Resistivity), Inductive
Conductivity.(Conductivity) and dry bulk density. The method used for
measuring chargeability and resistivity is the use of a Sample Core Induced
Polarisation (SCIP) tool. This method is suitable for simulating an Induced
Polarisation survey. The conductivity was measured with a KT-10C
conductivity meter. The dry bulk density was measured by a HCB-2200 scale
set up as a specific gravity (SG) station. These are considered industry-
standard and appropriate methods.
• Samples were then analysed at ALS Perth using ME-XRF26s. It consists of
a Lithium Borate Fusion and X-Ray Fluorescence Spectroscopy analysis.
This method is suitable for the determination of major and minor elements in
ore grade samples which require a high dilution digest such as Chromite and
high Manganese ores. These are considered industry-standard and
appropriate methods for the observed mineralisation at Kuro.
Drilling
techniques
• Drill type (eg core, reverse circulation, open-
hole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-
sampling bit or other type, whether core is
oriented and if so, by what method, etc).
• Not applicable as no drilling was undertaken.
Drill sample
recovery
• Method of recording and assessing core and
chip sample recoveries and results assessed.
• Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential
loss/gain of fine/coarse material.
• Not applicable as no drilling was undertaken.
Logging • Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the
relevant intersections logged.
• Description, sample ID and location are digitally recorded in field and then
stored in a database for each sample collected.
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all sub-
sampling stages to maximise representivity of
• No in field subsampling has been undertaken, with approximately 1kg
samples taken at each site.
• Samples were between the sizes of 10cm to 15cm
• At Terra Petrophysics, analysis methods are non-destructive; however,
samples are required to have flat or square ends and sometimes requires
them to be cut with a rock saw.
7
Criteria JORC Code explanation Commentary
samples.
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• At ALS Laboratories, the entire sample is passed through a primary crusher
to yield a crushed product which passes the screen specifications of the
designated crushing procedure. A prepared sample (~0.33 g) is used during
ME-XRF26s.
• The sample size and subsampling method is considered appropriate.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model, reading
times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (ie lack of bias)
and precision have been established.
• Rock chip samples were analysed by Terra Petrophysics Pty Ltd (Terra) in
Western Australia utilising the analysis techniques described below:
Induced Polarisation and Galvanic Resistivity
The apparent resistivity and induced polarization (or chargeability)
determinations are measured in time domain by a GDD Instruments SCIP
tester model TDLV. The resistivity and chargeability values are measured
by passing a constant current through the sample and then switching it on
and off at 2 second intervals. While the current is flowing through the sample,
the resistivity (ohm-m) is calculated. When the current is switched off, the
voltage across the sample drops and a decay curve is measured. The
induced polarization (mV/V) is calculated from this decay between 450-1100
milliseconds after turn off. Resistivity and induced polarization values are
stacked and averaged a minimum of 10 times for one reading. Terra provide
the average results from two readings (minimum).
Some samples (for example, silica rich samples) can be so resistive as to act
dielectric. Electricity does not flow through the sample as if it were
conductive, but charged particles are shifted minutely from their original
position. When the current is removed the charged particles slowly (due to
the high resistivity of the sample) relax to their original state. Therefore,
samples are measured to be more chargeable than would be recognised by
a field IP survey.
Induced Conductivity
The inductive conductivity measurement is made in the frequency domain at
10,000 Hz via an external magnetic field inducing a small current in the
sample. A Terraplus KT-10C conductivity meter is used to obtain
measurements. The measurement is most influenced by sample material at
the receiver coil and within a 10 cm radius from the centre of the sample.
Inductive conductivity is calculated from the difference in amplitude between
the sample and free air measurements. The limits of detectability are 0.1
S/m (maximum 100,000 S/m) and resulting data are presented in S/m.
Several inductive conductivity measurements are made and reported when
the sample size permits.
Dry Bulk Density
Measurements are obtained using a Highland HCB 2202 scale set up as a
SG station over a container of water. The density determinations are
calculated using Archimedes Principle. Dry bulk densities are determined by
dry weight divided by the buoyancy determined volume of each sample.
The accuracy of the buoyancy technique of density measurement is 0.01
grams per cubic centimetre (g/cm3). The results of the laboratory density
determinations are reported in grams per cubic centimetre. Density
measurements can be made on grab samples or drill core. Very large or
heavy samples (>1 kg) require coring or breaking prior to the density
determination.
• Rock chip samples were also analysed by Australian Laboratory Services
Pty Ltd (ALS) in Western Australia utilising their analysis technique for
manganese ore (ME-XRF26s).
8
Criteria JORC Code explanation Commentary
• ME-XRF26s uses a fusion disc with XRF for Al2O3, BaO, CaO, Cr2o3
Fe2O3, K2O, MgO, MnO, Na2O, P2O5, SO3, SiO2, TiO2 and LOI.
• These techniques are considered appropriate for the measurement of
electrical properties and dry bulk density.
• Terra Petrophysics have undertaken internal QAQC checks using reference
samples and no issues have been reported or identified.
• ALS laboratories have undertaken internal QAQC checks using CRM, blanks
and duplicates and no issues have been reported or identified.
• The data has sufficient quality for the reporting of Exploration Results at this
early stage of exploration.
Verification of
sampling and
assaying
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Significant results have been verified by multiple geologists confirming the
observations.
• Field data is collected and logged into a digital device by a qualified and
experienced geologist. Field data is routinely checked for accuracy and
completeness by the geologist, with further checks once the data is forwarded
to the database manager. Any errors or omissions reported by the database
manager are verified and corrected by the geologist with the corrected data
returned to the database manager for import and safe storage.
• Data management consultants compile the data into a relational SQL
database, hosted in a secure data centre, which enforces data integrity and
ensures that the data meets the required validation protocols. Assay
certificates are loaded directly from the laboratory supplied files to the SQL
database, to prevent data transcription errors, with routine quality control
monitoring to ensure the accurate performance of the assay data.
• No adjustments have been made to any assay data.
Location of
data points
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Location of rock chip samples were recorded using a handheld GPS which is
considered appropriate at this stage of exploration.
• Grid projection system has been standardised in the database to GDA2020
MGA zone 52
• Surface RL data is collected using GPS, which is then projected to an SRTM
DTM to improve accuracy. This is considered appropriate for this stage of
exploration.
Data spacing
and
distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been
applied.
• Selective sampling was conducted based on field observation and outcrops
identified as hosting potential for mineralisation.
Orientation of
data in
relation to
geological
structure
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
• At this early stage of exploration, the exact influence of geological structure is
unknown.
Sample
security
• The measures taken to ensure sample
security.
• Chain of custody is managed by the Company. Samples are freighted
directly to Terra with the appropriate documentation.
9
Criteria JORC Code explanation Commentary
Audits or
reviews
• The results of any audits or reviews of
sampling techniques and data.
• Not applicable at this early stage of exploration.
JORC Table Section 2: Reporting of Exploration Results:
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint
ventures, partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and environmental
settings.
• The security of the tenure held at the time of
reporting along with any known impediments
to obtaining a license to operate in the area.
• The Project is located ~140 km south-west of Halls Creek in northern Western
Australia and comprises granted licences E80/4975, E80/5082, E80/5083,
E80/5427, E80/5914, E80/6011 and E80/6012, and fourteen applications,
E80/6007, E80/6010, , E80/6211, E80/6212, E80/6213, E80/6214, E80/6215,
E80/6216, E80/6217, E80/6218, E80/6219, E80/6220, E80/6221 & E80/6212.
All tenements are held by Archer X Pty Ltd.
• Key terms for the 100% acquisition of Archer X Pty Ltd by Trek are outlined in
the ASX:TKM release dated 11/10/2023.
• The Licences are located on Native Title determined land belonging to the Yi-
Martuwarra Ngurrara and Gooniyandi in the West, the Jaru people in the East
and the Tjurabalan People to the South. There is no determined Native Title
claim over the Zahn prospect in the southeast of the Project.
• Native title, heritage protection and mineral exploration agreements have
been entered into with the Jaru and Yi-Martuwarra Ngurrara Native Title
Holders and Newmont Exploration Pty Ltd and/or Archer X Pty Ltd. Where
required relevant agreements have been assigned to Archer X Pty Ltd. All
fieldwork activities have been undertaken in conjunction with approval from
Native Title representatives of the Yi-Martuwarra Ngurrara and Jaru people
with heritage surveys completed at Martin, Coogan, Willis, Austin and Turner,
and cultural monitors were present when requested. An archaeological survey
was completed prior to drilling activities at Zahn.
• The granted Project area lies within five cattle stations; Larrawa, Lamboo,
Carranya, Yougawalla and Bulka.
Exploration
done by other
parties
• Acknowledgment and appraisal of exploration
by other parties.
• The Project area is relatively under explored with historical activity centred
on the Christmas Creek and Burrtina Pool prospects. A rare earth oxide
Resource within a carbonatite dyke (Cummins Range Project, RareX
Limited, ASX:REE), exists just outside and to the southeast of the Project
area.
• Gold nuggets were first discovered in proximity to the Christmas Creek in the
1890’s. Barnes (1985) suggests several thousand ounces were produced
from the area, mostly in the 1930s and 1950s. No official production records
exist. Further prospecting and illegal dozing of the site has occurred.
• CRA Exploration Pty Ltd (CRAE) undertook exploration in the area during the
mid-1970s, undertaking an airborne magnetic and radiometric survey, where
percussion drilling returned isolated bismuth (420ppm) and gold (0.6ppm)
anomalism.
• G.B. Barnes and Associates for M.H. Ynema in the mid-1980s to early 1990s
undertook sampling across stockwork veining produced a peak gold value of
21g/t Au. A 20g/t Au result was returned in 1992 after further sampling.
• Billiton Australia explored the southwestern portion of the Project between
1991 and 1994 for Pb-Zn mineralisation. Utilising 2D seismic data collected
in 1985 for oil exploration, gravity, and magnetic data Billiton targeted an oil-
trap style limestone dome with a single 565m deep diamond core hole. No
10
Criteria JORC Code explanation Commentary
significant assay results were returned however the model they were
targeting has been superseded.
• Northern Star Resource Ltd completed Air Core (AC) drilling targeting the
CRAE gold‐bismuth anomaly and geophysical aeromagnetic and radiometric
Share your feedback
Discover